Indoor Sound

In Door Sound Systems

https://thecrossroads.ro/web/components/com_jce/editor/tiny_mce/plugins/media/img/trans.gif

 The JBL system does an amazing job, therefore It is very hard to find a better solution when it comes to in door parties and midrange venues.

Constantly pushing the threshold for better, more useful products for the working musician and DJ, JBL Professional once again hits the target with the all-new MRX500 Series Loudspeaker System. Compact, lightweight, truly portable, the MRX500 is the ultimate PA system for musicians and DJ’s who need fully professional sound and performance.

   2x JBL MRX525       – 2800W – 4 ohm
   2x JBL MRX528S     – 3200W – 4 ohm
   2x Crown XTI4000   – 4800W 0 4 ohm / 2 Amps
   1x 19″ Rack 4HE, Doubledoor

        MRX 525 – Specifications:
Frequency Range (-10 dB): 40 Hz – 20 kHz, Crossover Mode: Passive
(Continuous / Program / Peak) 700 W/ 1400 W/ 2800 W, 100 hrs1
Maximum SPL: 129 dB SPL continuous (135 dB SPL peak)2
Nominal Impedance: 4 ohms – Input Connectors: Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 1240 mm x 535 mm x 460 mm / (48.75 in x 21.0 in x 18.0 in)
Net Weight: 38.2 kg / (84 lb)  
  MRS 528S – Specifications:
Frequency Range (-10 dB): 35 Hz – 250 Hz
(Continuous/Program/Peak) 800 W/ 1600 W/ 3200 W, 100 hrs1
Maximum SPL: 133 dB SPL continuous (139 dB SPL peak)2
Nominal Impedance: 4 ohms – Input Connectors: Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 1095 mm x 535 mm x 700 mm / (43 in x 21 in x 27.5 in)
Net Weight: 55 kg / (121 lb)  
  24 mono channels + 2 stereo channels 2 dual stereo inputs with 4-band EQ Neutrik mic XLR, Neutrik 1/4 inch jacks Channel insert, Super wide gain ‘DuoPre’ mic line input 4-band EQ with 2 swept mids and in/out switch Illuminated mute, Illuminated PFL & peak warning indicator Sound image pan, ALPS 100mm faders 6 auxiliary sends (2 pre, 2 post, 2 pre/post) 4 sub groups fed from each channel All inputs with level control, 12 bar meters L, R and M main mix outputs 2 matrix sections available; can send output to USB Individual channel 48V phantom power Direct output on every mono channel Peak and signal indication on every channel Configurable USB stereo audio in/out Master level controls on all outputs Easy to use layout – all connections and controls on top surface Cakewalk SONAR X1 LE bundled with mixer  
  Although the DriveRack PA+ is loaded with functions and features, it is easy to set-up and use. The dbx exclusive noise generator, has a new inteligent way of recognizing your Amps & Cabinets and calibrate itsself with sound generators. Just pick your speakers and amps from the built-in list on the PA+ and then let the Auto Level Wizard™ fine tune the level settings of each speaker. You can then let the Auto EQ® Wizard help you further optimize your sound. Finish up by using the AFS Wizard, which automatically sets filters to eliminate any feedback during performances. Within minutes, your system will sound like it was tuned by a pro! Get the most out of your PA with the DriveRack PA+, the worldwide standard in loudspeaker management.   CROWN XTI 4000 x 2 pieces       Eq in Crossover Delay alignment Limmiter EQ out and incredible clean sound